1. Fast speed, uniform effect, all stainless steel inside and outside the tank.
2. A new type of continuous cleaning equipment with functions such as cleaning solution spray washing, water spray rinsing, fan blowing, and hot air drying.
3. The working time, temperature, and power of the instrument are adjustable.
4. The cleaning machine is fully automatic with relay control. Except for manual loading and unloading of workpieces, all other process steps are automatically completed.
4. Greatly improved production efficiency and saved costs.
d2天堂破解版设备组成：整机为全封闭结构，由不锈钢骨架焊接而成，清洗机上盖为单层结构，由1.2mm厚的不锈钢板制成，外覆保温层，降低能耗。罐体采用单层结构，由厚度为1.2毫米的不锈钢板制成；内部隔板分为几个区域：过滤清洗液、沉淀铁屑、过滤油、分离油。罐体上设有补水口、排液口和溢流口，底部从两侧向中间倾斜，清洗液从罐体底部的出液口排出。水箱配有液位控制器，液位异常时能及时提醒人们补水停水，出现异常情况时紧急停机。不锈钢电加热器安装在防锈箱内，可在30 ~ 60分钟内将液体从室温升至使用温度。温度自动控制在10 ~ 90度范围内，有手动设定和自动控制。配有温度控制仪表，自动显示。罐外贴保温棉，防止散热。
Spray cleaning machine equipment composition: The entire machine is a fully enclosed structure, welded from a stainless steel framework, and the upper cover of the cleaning machine is a single-layer structure made of 1.2mm thick stainless steel plate, covered with an insulation layer to reduce energy consumption. The tank body adopts a single-layer structure, made of stainless steel plate with a thickness of 1.2 millimeters; The internal partition is divided into several areas: filtering cleaning solution, settling iron filings, filtering oil, and separating oil. The tank body is equipped with a water replenishment port, a liquid discharge port, and an overflow port. The bottom is tilted from both sides to the middle, and the cleaning liquid is discharged from the outlet at the bottom of the tank body. The water tank is equipped with a liquid level controller, which can timely remind people to replenish and stop water when the liquid level is abnormal. In case of abnormal situations, emergency shutdown is required. The stainless steel electric heater is installed in a rust proof box and can raise the liquid from room temperature to service temperature within 30-60 minutes. The temperature is automatically controlled within the range of 10~90 degrees, with manual setting and automatic control. Equipped with temperature control instruments, automatic display. Stick insulation cotton on the outside of the tank to prevent heat dissipation.
Among all cleaning methods, spray cleaning is one with high efficiency and uniform effect. The reason why the spray cleaning machine can achieve such an effect is closely related to its unique working principle and cleaning method. We know that in production and daily life, there are many things that need to be cleaned, and there are also many types and processes that need to be cleaned, such as removing oil stains, dust, surface rust, etc. Ordinary manual cleaning methods are both slow and expensive, while spray washing machines can clean workpieces in batches with uniform results, strong controllability, and low cost. Therefore, spray cleaning machines are increasingly widely used in various industries.
Advantages of spray cleaning machine: This machine has multiple workstations, full functions, reasonable structure, convenient operation, and good cleaning effect. It is of great significance for cleaning a large number of workpieces, improving the working environment, and improving the quality of cleaning and drying. The cleaning machine adopts an automated form of relay control, and all other process processes are automatically completed except for manual loading and unloading of workpieces.
This article is organized and published by the spray cleaning machine. Do you have any understanding of these contents? For more information, please click on: http://www.xayoudao.com We will have more exciting content waiting for you to check out.